Filter
Top Products
• Input 4 Presets/OSD — The specific settings for size, centering, contrast, brightness,
detail, zoom, and input conguration for input 4 can be saved to a preset. Up to 128
input presets can be saved. A saved preset can be recalled as desired.
Select a preset number and click Save or Recall as applicable.
NOTE: Saving to an existing preset overwrites the prior saved data with the new.
In addition this section enables the OSD text to be set for input 4.
The on-screen display provides a duration setting for the OSD text that appears at
each input 4 switch or input 4 preset recall.
• Video Mute — Select this to mute or unmute the video image. When selected, the
button text turns red.
• Freeze — Select this to freeze an image for use as a logo or for annotation.
• Auto Image — Select this to perform an auto image on an input.
• Volume % (DVS 304 A only) — This slider allows the user to adjust the volume
percentage for each input.
I/O Conguration Tab
The I/O Conguration tab allows input and output conguration, as well as EDID
emulation settings to be adjusted.
Figure 38. The I/O Configuration Tab Window
• Input Cong — Set a suitable video type for an input by clicking on the drop-down
box and selecting a listed video type. Check Film Mode if 3:2 pull down detection for
NTSC and 2:2 film detection for PAL video sources is relevant. Audio levels for each
input can be set via the up and down arrows.
• Auto Image — Auto Image can be enabled or disabled for all inputs.
• SDI Field Flip — This control allows the swapping of odd and even lines of the SDI
fields. It is disabled if the currently selected input is not in SDI format.
DVS 304 Series • SPPCP 63