Filter
Top Products
3. Follow the instructions that appear on the screen.
By default, the installation creates a C:\Program Files\Extron\Signal Processing directory
and places a shortcut icon in it.
Installation from the Web Site
1. On the Extron Web site (www.extron.com), select the Download tab.
2. On the Download Center screen, select Software from the side-bar menu on the
left.
3. Locate the Signal Processing Products Control Program file from the list and click on it.
4. Follow the on-screen instructions to download the program to your PC.
Starting the SPPCP
1. Click Start > Programs > Extron Electronics > Signal Processing
> Signal Processing Products Control Program.
Alternatively, if an icon was installed on the desktop, the SPPCP can be started
by clicking on the icon.
The Select Connection Type window appears.
2. Either choose the comm (serial) port that is connected to the DVS 304 or select the
TCP/IP tab.
NOTE: For a comm port, check the baud rate displayed in the comm port selection
window. To change the baud rate, click the Baud button, select the desired
rate.
To exit without starting the program, click Cancel.
If you selected a serial port in step 2 click OK. The control program is ready for operation.
3. If you selected TCP/IP tab in step 2, the TCP/IP Connection window appears.
a. Examine the IP Address eld, which displays the last IP address entered, or the
drop-down box which lists the most recently used IP addresses.
If listed, select the applicable IP address, or enter the correct IP address in the field.
NOTE: 192.168.254.254 is the factory-specied default IP address.
b. If the unit is password protected, enter the appropriate administrator or user
password in the Password field.
c. Click Connect. The Signal Processing Products Control Program is now ready for
operation.
DVS 304 Series • SIS Communication and Control 55