Filter
Top Products
5-13
CrossPoint 450 Plus and MAV Plus Switchers • Matrix Software
Updating firmware
The firmware upgrade utility provides a way to replace the firmware that is coded
on the switcher’s control board without taking the switcher out of service.
Update the switcher firmware as follows:
1
. Visit the Extron Web site, www.extron.com, click the Download tab, and then
click the Firmware link (figure 5-8).
3
2
3
1
1
Figure 5-8 — Location of firmware upgrade files
2. Select the appropriate firmware file to download and click Download.
3
. Enter the requested personal information and then click Download to copy the
firmware to your computer.
4
. Click Run twice (figure 5-9 on the next page). The PC downloads the
firmware update from the Extron Web site and starts the Extron Installation
Program to extract the firmware file.
5
. Click Next. The program extracts the firmware files and places them in a
folder identified in the InstallShield Wizard window.
N
Note the folder to which the firmware file is saved.
6. Click Finish to exit the program.