Filter
Top Products
CrossPoint 450 Plus and MAV Plus Switchers • Reference Information
B-2
Reference Information
CrossPoint 450 Plus Specifications
Video
Routing ........................................... 64 x 64, 64 x 48, 64 x 32, 48 x 64, 48 x 48, 48 x 32, 32 x 48, or 32 x 64 matrix
Gain ................................................ Unity
Bandwidth ...................................... 450 MHz (-3 dB), fully loaded
0 - 10 MHz .......................... No more than +0.1 dB to -0.1 dB
0 - 130 MHz ........................ No more than +1.0 dB to -1.0 dB
Crosstalk ......................................... -80 dB @ 1 MHz, -62 dB @ 10 MHz, -52 dB @ 30 MHz
Switching speed ............................ 200 ns (max.)
Video input
Number/signal type ..................... 32, 48, or 64 RGBHV, RGBS, RGsB, RsGsBs, HDTV, component video
Connectors ..................................... 32, 48, or 64 female BNC
Nominal level ................................ 1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video
Minimum/maximum levels
........ Analog: 0.5 V to 2.0 Vp-p with no offset
Impedance ..................................... 75 ohms
Return loss ..................................... <-30 dB @ 5 MHz
DC offset (max. allowable)........... 1.5 V
Video output
Number/signal type ..................... 32, 48, or 64 RGBHV, RGBS, RGsB, RsGsBs, HDTV, component video
Connectors ..................................... 32, 48, or 64 female BNC
Nominal level ................................ 1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video
Minimum/maximum levels
........ 0 V to 2.0 Vp-p (follows input)
Impedance ..................................... 75 ohms
Return loss ..................................... -30 dB @ 5 MHz
DC offset ........................................ ±5 mV with input at 0 offset
Switching type .............................. Triple-Action
™
Sync
Input type ...................................... RGBHV, RGBS, RGsB, RsGsBs
Output type .................................... RGBHV, RGBS, RGsB, RsGsBs (follows input)
Input level ..................................... 0.5 V to 5.0 Vp-p, 4.0 Vp-p normal
Output level .................................. AGC to TTL: 4.0 V to 5.0 Vp-p, unterminated
Input impedance .......................... Inputs 1 to 16: 75 or 510 ohms, switchable
Inputs 17 to 32, 48, or 64: 510 ohms
Output impedance
....................... 75 ohms
Horizontal frequency .................... 15 kHz to 150 kHz
Vertical frequency .......................... 30 Hz to 150 Hz
Max. propagation delay ............... 30 ns
Max. rise/fall time ........................ 4 ns
Polarity............................................ Positive or negative (follows input)
Audio — See "MAV Plus Specifications" (page B-4)
Audio input — See "MAV Plus Specifications" (page B-)
Audio output — See "MAV Plus Specifications" (page B-)