Filter
Top Products
3-31
CrossPoint 450 Plus and MAV Plus Switchers • Operation
Example 8: Recalling a preset
In the following example, a preset is recalled to become the current configuration.
The steps show the front panel indications that result from your actions.
1
. Clear all selections: Press and release the Esc button.
C O N T R O L
PRESET
ENTER
ESCVIEW
Press the Esc button to clear all selections.
The button flashes once.
2. Select Recall Preset mode: Press and release the Preset button.
PRESET
17 18 19
1 2 3
I
N
Press and release the Preset button.
The Preset button lights.
All input buttons with
assigned presets light.
Lit
(Preset Assigned)
Unlit
(No Preset Assigned)
3. Select the preset: Press and release the input button for the desired preset.
C O N T R O L
PRESET
ENTER
ESC VIEW
17 18 19 20 21 22 23 24
1 2 3 4 5 6 7 8
25
9
I
N
Press and release the Input 1 button.
The button blinks to indicate that this
preset number is selected but not recalled.
The Enter button blinks
to indicate the need to
recall the preset.
The Preset button
remains lit.
4. Confirm the change: Press and release the Enter button. The configuration
stored in the selected memory location is now the current configuration and
can be viewed in the View-only mode (see example 4).
C O N T R O L
PRESET
ENTER ESC VIEW
The Enter and Preset
buttons return to unlit or
background illumination.
Press the Enter button to
recall the preset.
All input buttons and output
buttons return to unlit or
background illumination.