Filter
Top Products
3-5
CrossPoint 450 Plus and MAV Plus Switchers • Operation
a
Input buttons — The input buttons have one primary function (•) and six
secondary (❏) functions:
• Select and identify an input.
❏ (Input 1 only) With the Output 1 button, select I/O Group mode. See "I/O
grouping" on page 3-23.
❏
Assign an input to the selected group in I/O Group mode and light to
indicate its assignment. See “I/O grouping” on page 3-23.
❏
Select a preset. See "Using presets" on page 3-29.
❏
(Systems with CrossPoint 450 Plus Wideband switcher BMEs,
Input 1 through 10 only) Display the RGB delay. See "Setting RGB delay
(systems with wideband BMEs)" on page 3-27.
❏
(Systems with audio BMEs) Display the output volume level. See
"Viewing and adjusting the output volume (systems with audio BMEs)"
on page 3-38.
❏
(Input 1 and Input 2 only) Toggle background illumination of the
buttons on and off. See "Background illumination" on page 3-45.
b
Output buttons — The output buttons have one primary function (•) and
four secondary (❏) functions:
• Select and identify output(s).
❏ (Output 1 only) With the Input 1 button, select I/O Group mode. See "I/O
grouping" on page 3-23.
❏
Assign an output to the selected group in I/O Group mode and light to
indicate its assignment. See “I/O grouping” on page 3-23.
❏
Mute the output. See "Muting and unmuting outputs" on page 3-32.
❏
(Systems with audio BMEs) Display the audio level of the selected input.
See "Viewing and adjusting the input audio level (systems with audio
BMEs)" on page 3-35.