Filter
Top Products
5-19
CrossPoint 450 Plus and MAV Plus Switchers • Matrix Software
Windows buttons, drop boxes, and trash can
The buttons, drop boxes, and trash can on the right side of the Matrix Switchers
Control Program window perform the following functions:
Power — Unavailable for matrix switchers, because the switcher
power cannot be controlled via software.
Executive Mode — Allows you to lock out front panel operations,
except for the view-only mode functions. Click the button to
cycle between Lock mode 0 (the indicator is white), Lock mode 1
(the indicator is red), and Lock mode 2 (the indicator is orange).
N
See “Setting the front panel locks (Executive modes)” in
chapter 3, “Operation” for more information on the Lock modes.
Rooms menu — Displays a list of up to 10 rooms. You can select a
room from the list to display it in the window.
N
A Room is a subset of outputs that are logically related to
each other, as determined by the operator. The matrix switcher
supports up to 10 rooms, each of which can consist of from 1 to
16 outputs.
Presets menu — Displays a list of up to 64 global presets and up to
100 room presets (10 rooms with 10 presets per room). You can
select a preset from the list to display it in the window and either
activate it (Go) or delete it (Delete).
Go — Activates the selected preset as the current configuration.
Save as ... — Allows the current set of ties to be saved as a preset.
Enter the preset number when prompted to do so.
Delete — Allows the current preset to be deleted.
Changes – Take — Allows you to save to file any changes made to the displayed
configuration.
Changes – Cancel — Returns to the previous screen, undoing any changes you
have made.
Trash can — Drag and drop from an input or output button to the
trash can to erase all ties associated with that input or output.
Windows menus
File menu
Save Matrix settings as ... — Saves a complete set of up
to 64 global presets and 100 room presets, plus the
last active setting (preset #0), to a file. Saved settings
include assigned icons and icon captions.
Restore Matrix settings from ... — Loads and activates
settings from a previously saved file.
Save This-Session’s settings — Same as Save Matrix settings as ..., but without
specifying a file name.
Restore Last-Session’s settings — Loads the ties, icons, and icon captions that
were saved during the last session.
Select printer — Selects the target printer.
Print tie map — Prints the tie set that is displayed on the screen.
Exit — Closes the Matrix Switchers Control Program.