Filter
Top Products
Operation, cont’d
CrossPoint 450 Plus and MAV Plus Switchers • Operation
3-20
Viewing a configuration
The current configuration can be viewed using the front panel buttons. The
View-only mode prevents inadvertent changes to the current configuration.
View-only mode also provides a way to mute video and audio outputs (see "Muting
and unmuting outputs" on page 3-32.
View the current configuration as follows:
1
. Press the Esc button to clear any front panel button indications that may be on.
2. Press and release the View button. All of the buttons light for outputs that are
not tied:
• Amber: No tied video and audio input
• Green: No tied video input
• Red: No tied audio input
3
. Select video, audio, or both to view by pressing the RGBHV
(CrossPoint 450 Plus switchers) or Video (MAV Plus video switchers) button,
Audio button, or both.
4
. Select the desired input or output(s) whose ties you wish to view by pressing
the input and output buttons.
5
. Press and release the View button to exit View-only mode:
N
• When you enter View-only mode, the output buttons light for all outputs
without ties.
• If you are viewing tied inputs and outputs and an output button for which
there are no ties is pushed, the output buttons light for all outputs without
ties.
• To see all ties of the current configuration, press and release each input
and output button, one at a time, with the RGBHV (CrossPoint 450 Plus
switchers) or Video (MAV Plus video switchers) button and the Audio
button lit.
• In View-only mode, you can view video and audio, video-only, or audio-only
ties. Pressing and releasing the RGBHV (CrossPoint 450 Plus switchers) or
Video (MAV Plus video switchers) button and the Audio button toggles each
on and off.
• When you view video and audio ties, the RGBHV (CrossPoint 450 Plus
switchers) or Video (MAV Plus video switchers) button is lit green and
the Audio button is lit red. After you select an input or output, the output
buttons light the following colors to show where video and audio ties are not
the same (audio is broken away):
Amber — video and audio
Green — video only
Red — audio only
• After 30 seconds of front panel inactivity, View-only mode automatically
deselects.