Filter
Top Products
Operation, cont’d
CrossPoint 450 Plus and MAV Plus Switchers • Operation
3-36
Example 10: Viewing and adjusting an input audio level
In the following example, an audio level is viewed and adjusted. The steps show
the front panel indications that result from your actions.
1
. Clear all selections: Press and release the Esc button.
C O N T R O L
PRESET
ENTER
ESCVIEW
Press the Esc button to clear all selections.
The button flashes once.
2. Enter Audio mode: Press and hold the Audio button for approximately
2 seconds until it blinks.
AUDIO
AUDIO
Press and hold the Audio button until it blinks.
2 seconds
3. Select an input: Press and release the Input 5 button.
17 18 19 20 21 22 23 24
1 2 3 4 5 6 7 8
25
9
I
N
17 18 19 20 21 22 23 24
1 2 3 4 5 6 7 8
25
9
26
10
27
11
O
U
Press and release the Input 5 button.
The button lights green.
The output buttons display the selected input's audio level and polarity (gain or attenuation).
Each output button indicates 0.5 dB when flashing and 1 dB when lit steadily.
When the buttons are lit green, they indicate a gain (+) audio level.
When the output buttons are lit red, they indicate an attenuation (-) level.
In this example, the output buttons display an audio gain level of +8 dB.
•
•
•