Filter
Top Products
5-23
CrossPoint 450 Plus and MAV Plus Switchers • Matrix Software
Icons in I/O Boxes — Erases any numbers in the I/O boxes in the
Control Program window (figure 5-6). You can place icons in the
boxes.
Numbers in I/O Boxes — Erases any icons in the I/O boxes in the
Control Program window and fills each box with the associated
input or output number.
Catch FPC/others changes — When checked, sets the switcher to report all
configuration and setting changes to the serial port or Ethernet connection
that turned this selection on. These reports allow the Matrix Switchers
Control Program to track the changes that occur in the switcher’s
configuration and settings, whether commanded via the front panel,
either serial port, or the Ethernet port.
Master-Reset selection
Master reset performs all of the following functions:
• Clears all ties
• Clears all presets
• Clears all output mutes
• Resets all I/O grouping
• Sets all input audio levels to 0 dB
• Sets all output audio levels to 0 dB attenuation (100 percent)
N
Master reset does not reset the Internet protocol (IP) settings.