Filter
Top Products
HTML Operation, cont’d
CrossPoint 450 Plus and MAV Plus Switchers • HTML Operation
6-16
Change the input gain and attenuation (systems with audio BMEs)
Users can set each input’s level of audio gain or attenuation (-18 dB to +24 dB) from
the RGB and Audio Settings page. Audio levels can be adjusted so there are no
noticeable volume differences between sources.
Change an input’s audio level setting as follows:
1
. Click the Input drop box. A drop-down scroll box appears (figure 6-13).
Figure 6-13 — Input selection drop box
2. Click and drag the slider or click on the scroll up button or scroll down
button until the desired input is visible.
3
. Click the desired input.
4. Click the Input Audio Level (dB) drop box. A drop-down scroll box appears
(figure 6-14).
Figure 6-14 — Gain drop box
5. Click and drag the slider or click on the scroll up button or scroll down
button until the desired input is visible.
6
. Click the desired gain or attenuation value.