Filter
Top Products
Chapter 8 Advanced Copy Management
8.2 Functions in the Action Area for Advanced Copy
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
290
● Copy session management
After preparation for Advanced Copy is complete, create a copy session to start copying volumes. Check the
copy session status during the copy operation.
(1)Copy session creation
Note that GUI can only create the SnapOPC+ sessions that are performed in volume units.
To create other copy sessions, use the copy management software. Refer to "8.2.2 Start SnapOPC+"
(page 291).
(2)Copy session check
Check the status of each copy session in the "Advanced Copy Session Information" field.
Refer to "8.1.1 Advanced Copy (Basic Information)" (page 252)
.
For REC sessions, checking copy path and buffer status are also available.
Refer to "8.1.6.2 Copy Path" (page 271)
and "8.1.6.3 REC Buffer" (page 273) for details.
■ Required settings for the Advanced Copy function (ODX)
● Advanced preparation
The following items must be prepared to use the ODX functions. The ODX function is supported by "Win-
dows Server 2012".
(1)Enable ODX
Enable the ODX function. The ODX function is disabled by default.
Refer to "8.2.8 Enable ODX" (page 310)
for details.
(2)Create an ODX Buffer volume
Create an ODX Buffer volume. No ODX Buffer volumes are registered by default.
Refer to "8.2.10 Create ODX Buffer Volume" (page 311)
for details.
(3)Event notification setting
Set whether to notify insufficient ODX Buffer volume capacity, session errors, and recovery from session
errors. When notifying, select the notification method.
Refer to "11.2.9.1 Setup Event Notification" (page 880)
.
Reboot any servers that are connected to the ETERNUS DX Disk storage system.
● Copy session management
After preparation for ODX copy is complete, create a copy session to start copying volumes. Check the copy
session status during the copy operation.
(1)Copy session check
Check the status of each copy session in the "Advanced Copy Session Information" field.
Refer to "8.1.1 Advanced Copy (Basic Information)" (page 252)
.