Filter
Top Products
Chapter 11 System Management
11.2 Functions in the Action Area for System
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
743
3 Click the [OK] button.
→ Changing of the user password starts.
4 Click the [Done] button to return to the [System] screen.
End of procedure
11.2.2 Set SSH Public Key
This function registers, changes, or deletes the current user's (your) SSH client public key.
The procedure to set the SSH public key is as follows:
Procedure
1 Click [Set SSH Public Key] in [Action].
An error screen appears in the following conditions:
• When "Old Password", "New Password", and/or "Confirm New Password" is not input
• When a parameter does not satisfy the input conditions
• When the current password does not match "Old Password"
• When "New Password" does not match "Confirm New Password"
• When using the SSH Client Key authentication, create a pair of the SSH client public key and the SSH
client secret key in advance, using the creation tool. One public key can be registered per user account.
When this function is executed, the public key is registered in the ETERNUS DX Disk storage system.
• The following types (formats) of public keys can be used:
- OpenSSH style RSA for SSH v1
- IETF style DSA for SSH v2
- IETF style RSA for SSH v2
The maximum of encryption strength of the supported public key is 4096-bit.