Filter
Top Products
Chapter 11 System Management
11.1 System Status
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
717
The following items are displayed in the Main area:
• Customer Information Setup
Whether or not the customer information has been specified at the REMCS center is displayed.
• Communication Environment Setup
Whether or not the communication environment information has been specified at the REMCS center is
displayed.
• Support Status
The Remote Support status is displayed.
- "-" (hyphen)
The Remote Support is not operating.
- Operating
The Remote Support is operating.
- Maintenance in Progress
The ETERNUS DX Disk storage system is under maintenance. When the operation to complete
maintenance is performed, the status returns to "Operating".
- Stopped
The Remote Support has temporarily been stopped. Use the procedure in "11.2.4.6 Stop/Restart Remote
Support" (page 818) to restart the Remote Support and return to the "Operating" state.
If the support status is "Operating" or "Maintenance in Progress", one of the messages below appears in
parentheses based on the Remote Support operating status.
- Controller Firmware Download in Progress
- Termination of Controller Firmware Download in Progress
- Controller Firmware Upgrade in Progress
- Log Collection in Progress
• Controller Firmware Version
The current controller firmware version is displayed.
- VxxLyy-zzzz (Vxx: Version, Lyy: Level, zzzz: Release number)
• Automatic Firmware Upgrade
Whether the automatic firmware upgrade is enabled or disabled is displayed.
- "-" (hyphen)
The Remote Support is not operating.
- ON (download schedule)
The automatic firmware upgrade is enabled. Receive controller firmware according to the download
schedule.
- OFF
The automatic firmware upgrade is disabled.
• Automatic Firmware upgrade (with activation on next power cycle)
Whether or not to execute the controller firmware application, after controller firmware download has
been completed, is displayed.
- "-" (hyphen)
The Remote Support is not operating.
- ON
Execute the controller firmware application after controller firmware download is complete. The
downloaded controller firmware will be changed to the controller firmware which will be enabled at the
next startup.
- OFF
Do not execute the controller firmware application after controller firmware download is complete.