Chapter 9 Connectivity Management
9.2 Functions in the Action Area for Connectivity
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
488
(2) Select the host that is to be registered from the FC host list, input the FC host information, and click
the [Add] button.
- Checkbox to select a host
Select the checkbox of the FC host that is to be registered in the ETERNUS DX Disk storage
system. The host name and host response can only be specified for the selected FC host.
- Name
Input the name for the FC host.
The following input conditions apply:
• Up to 16 alphanumeric characters and symbols (except ", (comma)" and "?")
• Space
- Host Response
Select a host response to be assigned to a host.
The host response list created in the ETERNUS DX Disk storage system is displayed.
• Solaris MPxIO
• HP-UX
• AIX EMPD (*1)
• AIX VxVM
• AIX Single Path
• VS850/SVC
• Host responses created in the ETERNUS DX Disk storage system
• Default
*1: EMPD: ETERNUS Multipath Driver
→ A confirmation screen appears.
Filter Setting
Filter Description
WWN
Input the WWN that is to be displayed.
FC hosts matching or partially matching the entered WWN are displayed.
When not using the WWN for filtering, leave this item blank.