Filter
Top Products
Chapter 9 Connectivity Management
9.2 Functions in the Action Area for Connectivity
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
597
3 Click the [OK] button.
→ Modification of the CA reset group starts.
4 Click the [Done] button to return to the [CA Reset Group] screen.
End of procedure
9.2.7 Host-LU QoS Management
Host-LU QoS management provides the following functions:
• Enable/Disable Host-LU QoS
• Set Host-LU QoS
• Release Host-LU QoS
• Start Host-LU QoS Performance Monitoring
• Stop Host-LU QoS Performance Monitoring
• Set FC/FCoE Host QoS
• Set iSCSI Host QoS
• Set SAS Host QoS
• Set FC Port QoS
• Set iSCSI Port QoS
• Set SAS Port QoS
• Set FCoE Port QoS
• Add LU QoS Group
• Delete LU QoS Group
• Modify LU QoS Group
9.2.7.1 Enable/Disable Host-LU QoS
This function enables or disables the Host-LU QoS.
• If the Host-LU QoS is changed from "Enable" to "Disable", the configured bandwidth limit is saved.
• If the Host-LU QoS is changed from "Disable" to "Enable", the Host-LU QoS operates within the saved
bandwidth limit.
• If the bandwidth limit is not specified when the Host-LU QoS is changed to "Enable", "Unlimited" is
applied to all the bandwidth limit settings for hosts, ports, and LUNs (the setting value is not changed).