Filter
Top Products
Chapter 10 Component Management
10.1 Component Status
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
623
• Battery
The battery charge level is displayed.
When the battery charge level is 90% or more, "Full Charge" is displayed. When the battery charge level is
less than 90%, "xx%" is displayed. This item is displayed only when using the ETERNUS DX410 S2/DX440 S2
or the ETERNUS DX8100 S2/DX8700 S2.
• Remote Support
The Remote Support (REMCS) status is displayed.
- Operating
The Remote Support is operating.
- Maintenance in Progress
The ETERNUS DX Disk storage system is under maintenance.
- Stopped
The Remote Support is stopped.
- "-" (hyphen)
The Remote Support is not configured.
• Operation Mode
The operation mode is displayed.
- Active
The ETERNUS DX Disk storage system is operating.
- Maintenance
The ETERNUS DX Disk storage system is under maintenance.
• Controller Module connected to the GUI
The CM that is connected to GUI is displayed.
• Firmware Version
The current controller firmware version is displayed.
• Model Upgrade
Whether the model upgrade is possible or not is displayed. When this item is not displayed, the model
upgrade is not possible.
- Not Upgraded
A model upgrade has not been performed yet.
- Upgraded
A model upgrade has been performed.
• Controller Enclosure
The status of the Controller Enclosure (CE) is displayed. Refer to "B.5 Component Status" (page 977)
for
details. This item is displayed only when using the ETERNUS DX80 S2/DX90 S2, the ETERNUS DX410 S2/
DX440 S2, or the ETERNUS DX8100 S2.
• Drive Enclosure#xx
The status of the drive enclosure (DE) is displayed. "#xx" indicates the DE number. Refer to "B.5 Component
Status" (page 977) for details. This item is displayed only when using the ETERNUS DX80 S2/DX90 S2, the
ETERNUS DX410 S2/DX440 S2, or the ETERNUS DX8100 S2.