Filter
Top Products
Chapter 8 Advanced Copy Management
8.2 Functions in the Action Area for Advanced Copy
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
320
The procedure to set an REC copy path is as follows:
Operation Mode Selection
In this screen, select the operation mode.
Procedure
1 Click [Set Copy Path] in [Action].
• Only copy path information files created/saved with this function can be loaded with this function.
• The device information files that are exported/saved by the following storage systems can be loaded for
this function:
- ETERNUS DX90 S2
- ETERNUS DX410 S2/DX440 S2
- ETERNUS DX8100 S2/DX8700 S2
- ETERNUS DX90
- ETERNUS DX410/DX440
- ETERNUS DX8100/DX8400/DX8700
- ETERNUS4000
- ETERNUS8000
- ETERNUS6000
• Use the procedure in "8.2.13 Delete All Copy Path" (page 343)
to delete the copy path information in the
local device. The copy path information of the local device is initialized.
• The round trip time can be measured only between the local device and a remote device that has a
physical path to the local device. When a copy path is created between remote devices, apply a copy path
information file to the applicable device before measuring the round trip time.
• The round trip time can be measured only when the connection type is "Remote".
• To change the measured round trip time, refer to "8.2.17 Measure Round Trip Time" (page 349)
.
• To change the link speed, create a copy path with a new link speed by using this function, and apply the
created copy path to the related storage systems.