Filter
Top Products
iii
Jog Jog Operation
Auto Operation Operates via Internal Sequence by Setting Multi-Function Terminal (5 Way * 8 Step)
Fault Reset Trip Status is Removed when Protection Function is Activated
Operating Status Frequency Detection Level, Overload Alarm, Stalling, Over Voltage, Under Voltage, Inverter
Overheating, Running, Stop, Constant Speed, Inverter By-Pass, Speed Searching, Auto-Operation
Step, Auto-Operation Sequence
Fault Output Contact Output (30A, 30C, 30B) – AC 250V 1A, DC 30V 1A
Output Sig.
Indicator(FM,LM) Choose 1 from Output Frequency, Output Current, Output Voltage, DC Voltage, Output Torque
Output Voltage: 0 ~ 10V (for FM: Linear output, 15V Max., LM), Pulse output: 500Hz (for LM).
Operation Function DC Braking, Frequency Limit, Frequency Jump, Second Function, Slip Compensation, Reverse
Rotation Prevention, Auto Restart, Inverter By-Pass, Auto-Tuning, PID Control
Inverter Trip Over Voltage, Under Voltage, Over Current, Fuse Open, Ground Fault, Inverter Overheating, Motor
Overheating, Output Phase Open,
Overload Protection, External Fault 1, 2, Communication Error, Loss of Speed Command, Hardware
Fault, Option Fault etc.
Inverter Alarm Stall Prevention, Overload Alarm, Temperature Sensor Fault
Protective Function
Momentary Power Loss Less than 15msec: Continuous Operation,
More than 15msec: Auto Restart Possible
Operation
Information
Output Frequency, Output Current, Output Voltage, Frequency Value Setting, Operating Speed, DC
Voltage, Output Torque
Display
Keypad
Trip
Information
Indicates a Fault when the Protection Function activates, Retains Up to 5 Faults
Ambient Temperature
-10 °C ~ 40 °C (14 °F ~ 104 °F), CE Certification: 41 °F ~ 104 °F (5 °C ~ 40 °C)
Storage Temperature
-20 °C ~ 65 °C (-4 °F ~ 149 °F)
Ambient Humidity Less Than 90 % RH Max. (Non-Condensing), CE Certification: 5 ~85% (Non-Condensing)
Altitude - Vibration
Below 1,000m or 3,300ft above sea level · Below 5.9m/sec
2
(=0.6g)
Air Pressure 86 ~ 106kPa
Environment
Application Site No Corrosive Gas, Combustible Gas, Oil Mist, or Dust
Cooling Method Forced Air Cooling