Filter
Top Products
EN Product Maintenance 225
Installing a new document scanner separation
pad
The document scanner separation pad is a user-replacable part that
is ordered as part of a kit for the HP LaserJet 3200 product.
The separation pad kit for document scanner path — part number
RY7-5055-000CN — contains three pieces:
l Document scanner separation pad
l Separation mylar
l Pad holder
When to replace the document scanner separation
pad
Replace the document scanner separation pad when the document
scanner feeds multiple sheets at once through the scanner path
(double-feeds or multi-feeds). Recurring multi-feed problems indicate
that the document scanner separation pad is worn.
To install a new document scanner separation pad
1 Open the document release door.
2 Rotate the strap on the left side of the product door to unhook the
strap.
3 Grasp the separation pad and mylar sheet together (callout 1 in
the graphic below) and lift them straight away from the document
release door. This action should also release the pad holder
(callout 2 in the graphic below).
4 Press the new pad holder, with pad and mylar attached, into
position. It should snap into place.
5 Rehook the strap and close the document release door.