Filter
Top Products
82 Chapter 4 - Faxing EN
To change the default resolution
The choices for this setting are Fine (the factory default), Standard,
Superfine, and Photo. See “Resolution options” on page 62 for more
information.
Note If you only want to change the resolution for the fax job you are currently
sending, see “Adjusting the resolution for the current job” on page 62.
1 Press E
NTER/MENU.
2 Use the < or > key to select
FAX SETUP and then press ENTER/
M
ENU.
3 Use the < or > key to select
FAX SEND SETUP and then press
E
NTER/MENU.
4 Press E
NTER/MENU to select DEFAULT RESOLUTION.
5 Use the < or > key to select
FINE (the default), STANDARD,
SUPERFINE, or PHOTO.
6 Press E
NTER/MENU to save your selection.
Selecting tone- or pulse-dialing mode
Use this procedure to set the product to tone- or pulse-dialing mode.
You can use this procedure to set the product to tone- or pulse-dialing
mode. The default is set to Tone. Leave this as Tone unless you
know your telephone is incapable of tone dialing.
To select tone- or pulse-dialing
1 Press ENTER/MENU.
2 Use the < or > key to select
FAX SETUP and then press ENTER/
M
ENU.
3 Press > once to select
SEND SETUP and then press ENTER/MENU.
4 Use the < or > key to select
DIALING MODE and then press
E
NTER/MENU.
5 Use the < or > key to select
TONE or PULSE and then press
E
NTER/MENU to save your selection.