Filter
Top Products
• Each option is identified with an EFI device path. Not all options are available, depending
on the configuration of the server and the options purchased. Device paths can differ slightly
on different product models.
• On both serial device examples, UART 9600 indicates the current baud rate of the serial
device (can be changed with the EFI Shell baud command), VenMsg Vt100+ is the current
emulation type (several different terminal emulation protocols are supported).
• You can select only one terminal emulation type for each serial console, but you can select
multiple serial consoles at a time.
Select Active Standard Error Devices
Use this option to define the devices that display error messages from the system console.
This menu is identical to the Console Output Devices menu. The server does not support different
configurations for Output and Error console. When you make changes to either Output or Error
console menus, you must make the identical change in the other menu. When you change serial
devices, you must make changes to Output, Input, and Error menus for proper operation
Using the System Configuration Menu
The System Configuration menu on servers with EFI firmware version 2.0 or higher includes the
following options:
• Security/Password Menu: Enables you to change the administrator and user passwords.
• Advanced System Information Menu: Displays information about system and component
configuration.
• Set System Date: Enables you to modify the system date.
• Set System Time: Enables you to modify the system time.
• Reset Configuration to Default: Enables you restore system settings to their original
configuration.
• Help: Displays additional information about the available options.
• Exit: Returns to the EFI startup menu.
Security/Password Menu
Enables you to set administrator and user passwords to provide different levels of access to the
system firmware.
Resetting Passwords
If you forget your passwords, reset them by running using the iLO MP <Ctrl+N>rs command.
This commando resets the iLO MP and resets the password.
NOTE: You can only run this command when directly connected to the server.
Advanced System Information
Displays information about server and component configuration.
Set System Time
Modifies the server time.
Set System Date
Modifies the server date.
Set User Interface
Changes the legacy boot manager user interface.
172 Utilities