Filter
Top Products
NOTE: To access the three power cables near the PCI cage, you must lift up the connector
bridge for the PCI cage fan.
7. Unscrew the system board mounting screw. A screw symbol is adjacent to the mounting
screw. See Figure 4-51.
Figure 4-51 Removing the System Board Mounting Screw
8. Remove the system board:
a. Grasp the memory controller chip heat sink and slide the system board toward the front
of the server.
b. Lift up the processor module side of the system board and slide it free of the PCI cage
bay. See Figure 4-52.
Figure 4-52 Removing the System Board
Replacing the System Board
1. Remove the old system board.
Removing and Replacing Internal Components 83