Filter
Top Products
Figure 4-55 Sliding the System Board into the Chassis
4. Install the system board mounting screw. See Figure 4-56.
5. Connect all cables to their appropriate connectors on the system board.
6. Install the six rear backplane system board mounting screws.
Figure 4-56 Installing the Rear Panel Mounting Screws
7. If the server has an iLO MP, install it now. See “Replacing the MP Card” (page 79).
8. Replace the power connectors in their slots on the back of the server and install the power
connector mounting screws. See Figure 4-57.
Removing and Replacing Internal Components 85