Filter
Top Products
UUID: A8F2D6EC-DBE5-11D9-9172-AE65D056B60F (Valid)
Secondary UUID is Identical
Product ID: 0x10A
18. Use the EFI date and time commands to set the correct local date and time.
19. Review the system configuration in the Boot Configuration Menu or EFI shell and reconfigure
settings as necessary.
20. Boot the server and resume normal operation.
Removing and Replacing the Power Supply Interface Module
The power supply interface (PSI) module supports up to two redundant power supplies.
Removing the Power Supply Interface Module
1. Power off the server, disconnect all power and external cables, and remove the top metal
cover.
2. Remove the system board. See “Removing and Replacing the System Board” (page 82).
3. Remove the power supply (or supplies). See “Removing the Power Supply” (page 48).
4. Lift the power cables out of their metal holding clips. See Figure 4-58.
Figure 4-58 Power Cables and Holding Clips
Removing and Replacing Internal Components 87