Filter
Top Products
6. Remove the hard drive backplane by sliding it in the direction of the arrow and pulling it
outward from its standoff posts. See Figure 4-66 and Figure 4-67.
Figure 4-66 Removing the Backplane
Figure 4-67 Removing the Backplane from the Chassis
Replacing the Hard Drive SCSI Backplane
1. Insert the hard drive backplane into its four chassis standoffs and slide it to the left. This
locks the hard drive backplane in place.
2. Install the two backplane mounting screws and connect the two SCSI cables.
3. Replace any removed hard drives.
4. Connect the backplane power cable and lower the fan power bridge until it snaps in place.
5. Replace the PCI cage in the server and secure it.
6. Replace the top metal cover, and reconnect all of the power and external cables.
92 Removing and Replacing Components