Filter
Top Products
4. Lift the automatic document feeder mechanism.
5. Clean the plastic strip with a soft cloth or sponge slightly moistened with a nonabrasive
glass cleaner.
CAUTION: Do not use abrasives, acetone, benzene, or carbon tetrachloride on
the plastic strip, since they can damage it. Do not place or spray liquid directly on
the plastic strip. The liquid might seep under the glass and damage the device.
6. Gently lower the automatic document feeder mechanism to avoid dislodging the
plastic strip, and then close the cover of the automatic document feeder.
7. Plug in the power cord, and then turn on the device.
NOTE: If you still see dust or lines on scans after cleaning the plastic strip, you
may need to order a new plastic strip. For more information, see
Solve a
problem.
Turn off the device
Turn off the product by pressing the (power) button located on the product. Wait until
the power light turns off before unplugging the power cord or turning off a power strip. If
you improperly turn off the product, the print carriage might not return to the correct
position causing problems with the ink cartridges and print quality issues.
Chapter 1
24 Get started