Filter
Top Products
148 Chapter 10 Problem solving ENWW
E-mail Gateway
rejected the job
because of the
addressing
information.
Job failed
One or more of the e-mail addresses is incorrect. Send the job again with the
correct addresses.
Event log empty The user is attempting to view an empty event log by selecting SHOW EVENT LOG
from the control panel.
FINISHING
PROCESS NOT
FUNCTIONAL
For help touch
OK
The external device might not be able to perform the finishing process, but the
device might still pass paper. The print job will be completed unfinished.
FLATBED COVER
OPEN
The ADF cover is open. Close the cover.
Folder list is
full. To add a
folder, you must
first delete a
folder.
The MFP limits the number of folders that can be established. Delete an
unused folder to add a new folder.
Found LDAP
Gateway: <IP
Address>
The MFP has located the listed SMTP gateway on the network. Accept the
address to enable addressing.
Found SMTP
Gateway: <IP
Address>
The MFP has located the listed SMTP gateway on the network. Accept the
address to enable addressing.
Front Side
Optical System
Error
The scanner has experienced an error. Turn the MFP off, and then turn the
MFP on.
[FS] DEVICE
FAILURE
The memory device indicated has failed. Turn the MFP off, and then turn the
MFP on.
If the error persists, replace the memory device.
[FS] FILE
OPERATION FAILED
A PJL file system command was received, but the command was illogical (for
example, a command to download a file to a non-existent directory).
[FS] FILE SYSTEM
IS FULL
A PJL file system command was received to store something on the file
system, but the file system is full.
[FS] IS WRITE
PROTECTED
The file system device is protected. No new files can be written to it.
[FS] NOT
INITIALIZED
The file system has not been initialized
Message Explanation or recommended action