Filter
Top Products
62 Chapter 3 Printing ENWW
Setting the registration
Use the Set Registration feature to center the front and back images on a page that has been
duplexed (printed on both sides). This feature also allows edge-to-edge printing to be set to
within approximately 2 millimeters of all edges of the paper. Image placement will vary slightly for
each input tray. The alignment procedure must be performed for each tray. An internal-tray
registration page allows the administator to calibrate each tray.
To set the registration
1 Touch Menu.
2 Touch Configure Device.
3 Touch Print Quality.
4 Touch Set Registration.
You can select a tray by specifying a Source. The default Source is Tray 2. If you want to set the
registration for Tray 2, go to step 7. Otherwise, proceed to the next step.
5 Touch Source.
6 Touch a tray. After you touch the tray, the control panel display returns to the Set
Registration menu.
7 Touch Print Test Page.
8 Follow the instructions on the printed page.