Filter
Top Products
150 Chapter 10 Problem solving ENWW
MANUALLY FEED
[TYPE] [SIZE]
Load the requested media into Tray 1.
To override the message, touch OK if the required media is available in another
tray.
Touch OK to use a type and size that is available in another tray.
Multiple page
scan mode
This message is displayed when using Job Mode to e-mail.
Network
connection
required
For Digital
Sending
Contact
administrator
A digital sending feature has been configured, but a network connection is not
detected. Verify the network connection. Contact your network administrator.
No job to cancel The S
TOP button was pressed, but no active job or buffered data is present.
The message is displayed for approximately two seconds before the MFP
returns to the READY state.
Novell Login
Required
Novell authentication has been enabled for this destination. Enter Novell
network credentials to access the digital sending feature.
OUTPUT PAPER
PATH OPEN
The paper path between the MFP and the external finishing device is open.
Close the path to continue printing.
Password or name
is incorrect.
Please enter
correct login.
The user name or password is incorrect or mis typed. Retype the user name
and password.
PERFORM PRINTER
MAINTENANCE
The MFP has passed its prescribed printed-page threshold between
maintenance procedures.
To ensure optimum print quality, the MFP prompts you to perform routine
maintenance every 350,000 pages. To order a printer maintenance kit, see
Parts and accessories, or go to www.hp.com/support/lj9040mfp
or
www.hp.com/support/lj9050mfp
.
Performing
upgrade
The MFP is performing a firmware upgrade.
Processing
Cleaning Page
The MFP is generating the cleaning page.
Receiving
Upgrade
The MFP is receiving a firmware upgrade.
REINSERT
DUPLEXER
The duplexer has been removed and must be reinstalled.
Message Explanation or recommended action