Filter
Top Products
ENWW Embedded Web Server 25
Communicating by using the HP Jetdirect embedded print
server
The MFP has an embedded print server. If you cannot communicate with the MFP over the
network, check the operation of the embedded print server. Check the embedded Jetdirect
configuration page for the message I/O CARD READY, and for the correct network configuration
settings. See To print a configuration page for instructions.
Verify that the print server was able to link to the network automatically:
● Check that a link LED on the MFP’s LAN (RJ-45) connector is lit, which indicates a
successful link. A link failure is indicated when both LEDs are off.
● Check the embedded Jetdirect configuration page for error messages. The message LOSS
OF CARRIER ERROR indicates a link failure.
For link failures, check all of the network cable connections. In addition, you can try to manually
configure the link settings on the embedded print server by using the MFP control-panel menus
(MENU, CONFIGURE DEVICE, I/O, EMBEDDED JETDIRECT MENU, LINK SPEED).
Note HP Jetdirect print servers are available for many different network connections, including
802.11 networks.
Communicating by using the HP Jetdirect print server
If you cannot communicate with the MFP over the network, check the operation of the print
server. Check the Jetdirect configuration page for the message I/O CARD READY.
To print a configuration page
1 On the touch screen of the graphical display touch Menu.
2 Touch Information.
3 Touch Print Configuration.
For troubleshooting information, see the documentation that came with the print server.
Embedded Web Server
The HP LaserJet 9040mfp/9050mfp comes equipped with an embedded Web server. Use the
HP embedded Web server to view the MFP and network card status and to manage printing
functions from your computer. With the HP embedded Web server, you can complete the
following tasks:
● view MFP status information
● determine the remaining life on all supplies and order new ones
● view and change tray configurations
● view and change the MFP control-panel menu configuration
● view and print internal pages
● receive notification of MFP and supplies events
● add or customize links to other Web sites
● select the language in which to show the embedded Web server pages
● view and change network configuration