Filter
Top Products
ENWW Understanding MFP messages 149
Gateways failed The MFP was unable to locate either an SMTP or LDAP server. Verify the
gateway address.
HP Digital
Sending:
Delivery Error
A digital send job has failed and cannot be delivered. Try to send the job again.
INCORRECT The wrong PIN was typed.
Return to the previous screen and type the PIN again.
Initializing... The MFP is starting up.
INSERT OR
CLOSE TRAY xx
The specified tray must be inserted or closed for printing to continue.
INSTALL
CARTRIDGE
The print cartridge has been removed or has been installed incorrectly. It must
be replaced or reinstalled correctly for printing to continue.
INSUFFICIENT
MEMORY TO LOAD
FONTS/DATA
<DEVICE>
To continue
touch OK
The MFP does not have enough memory to load the data (for example, fonts or
macros) from the location specified. Touch OK to continue without this
information.
If the message persists, add more memory.
INTERNAL DISK
NOT FUNCTIONAL
The internal hard disk has failed. Turn the MFP off, and then turn the MFP on.
If the message persists, see the HP support flyer or go to www.hp.com/support/
lj9040mfp or www.hp.com/support/lj9050mfp.
LDAP Gateway Not
Responding
The LDAP server is not communicating with the MFP. Verify the LDAP server
address. Contact the network administrator.
LDAP Gateway OK The LDAP server has responded after exceeding the time out value for an
address request.
LDAP Server is
not responding
Contact
administrator
The LDAP server has exceeded the time out value for an address request.
Verify LDAP server address.
LOAD TRAY xx
To use another
tray touch OK.
The job requires a specific media type and size that is not available.
Load the requested media into Tray 1.
Touch OK to use a media type and size that is available in another tray, or follow
the instructions in the on screen dialog box.
LOAD TRAY 1
[TYPE][SIZE]
The tray is empty or configured for a different size than the size requested.
Follow the instructions on the pop-up dialog box.
Message Explanation or recommended action