Filter
Top Products
ENWW Basic copying instructions 75
Basic copying instructions
This section provides the basic instructions for copying. Standard paper sizes are automatically
detected when the document is placed on the scanner glass or loaded in the ADF. You can
override the auto-detect feature by specifying the required input (Describe Original) and output
(Copy Settings) at the control panel.
Copying by using the default settings
The default settings for copying are the following:
● Number of copies: One
● Size: Letter/A4-size original and letter/A4-size copy
Note The MFP automatically detects the original paper size if the size is standard, and makes a
same-size copy. The factory default paper-size setting is Letter or A4, only if no paper is detected.
● Page Orientation: Portrait
● Number of Sides: One-sided copying
● Page Content: Mixed (mixed text and graphics)
● Job Mode: Off
● Heavy Paper: Off
To make copies by using the default settings
1 Place the document face down on the scanner glass or in the ADF.
2 Touch Copy.
3 Press
START.
Copying by using user-defined settings
Use the following procedure to can change the settings for your copies.
To make copies by using settings other than the default settings
1 Place the original face down on the scanner glass or in the ADF.
On the touch screen of the graphical display, do the following:
2 Touch Copy.
3 Touch Original to view the options. You can select Basic options or Advanced options.
4 Touch the Basic items that describe your original. The following options are available:
• Paper Size: Select the paper size of your original.
• Orientation: Select Portrait or Landscape.
• Number of Sides: Select 1 or 2.
• Content: Select Text, Photo, or Mixed.
5 Touch the Advanced tab to view your options in the Advanced screen. The following options
are available:
• Heavy Paper: Select On if your original is heavy paper.
• Job Mode: If you are combining multiple scans into a single job, select On. (See Using Job
Mode.)
6 After you make your selections, touch OK.