Filter
Top Products
ENWW Loading input trays 31
8 Open Tray 1.
9 Load paper according to size and finishing options. See Orienting media for information
about loading preprinted, letterhead, and prepunched paper.
CAUTION To avoid jams, print sheets of labels one sheet at a time.
10 Adjust the paper guides so they lightly touch the paper stack, but do not bend the paper.
11 Make sure the paper fits under the tabs on the guides and not above the load level
indicators.
Note If printing on A3- or 11 x 17-size paper, or other long media, also pull out the tray extension until
it stops.
12 Look at the control panel display within a few seconds of loading the paper. The tray
configuration is displayed. (Open and close the tray again if the time has already elapsed.)
13 Touch EXIT to exit the menus. The tray is ready to use.