Filter
Top Products
Powering On and Starting the System
HP NonStop S-Series Hardware Installation and FastPath Guide—541880-001
8-17
Verifying Topology and System Components
a. Run the SP Tool Application:
•
To start the SP Tool Application independently:
1. Click Start > Programs > HP SP Tool > SP Tool. The SP Tool Logon
dialog box appears.
2. In the system list, select the system you want to log on to.
3. Enter the low-level link (MSP) user name and password in the User
Name and Password fields, respectively.
4. Click Log On. The SP Tool Application main window appears.
•
To start the SP Tool Application from the OSM Low-Level Link:
1. Launch the OSM Low-Level Link.
2. In the system list, select the system you want to log on to.
3. Enter the low-level link (MSP) user name and password in the User
Name and Password fields, respectively.
4. Click Log On. The OSM Low-Level Link Application main window
appears.
b. From the Tools menu, select Advanced Service Processor Tool. The HP SP
Tool main window appears.
c. From the System menu, select Verify System to display configuration
information for all PMF CRUs and IOMF CRUs in the system and to verify that
all ServerNet paths are functional.
d. From the ServerNet menu, select Path Test to verify that all ServerNet paths
from group 01 to all other groups in the system are functional.
e. Click Exit to close the SP Tool Application.