Filter
Top Products
FastPath Tasks: Optional
HP NonStop S-Series Hardware Installation and FastPath Guide—541880-001
F-25
Installing a Software Product Revision (SPR)
Installing a Software Product Revision (SPR)
1. Save Current System Configuration Database
1. At the TACL prompt, run SCF:
-> SCF
2. List saved configuration files:
-> FUP INFO $SYSTEM.ZSYSCONF.CONF*
3. Save the current system configuration using a unique file name:
-> SAVE CONFIGURATION xx.yy
where xx.yy is a number in the range 0.0 through 99.99. The following message
appears when the configuration has been saved:
The configuration file $SYSTEM.ZSYSCONF.CONFxxyy has been
created.
4. If you specify an existing configuration file CONFxxyy, SCF asks if you want to
replace it. If you do not want to replace it, you must repeat the SAVE command
with a different value for xx.yy.
Task Page
1. Save Current System Configuration Database
F-25
2. Log On to DSM/SCM F-26
3. Receive SPR Into Archive F-26
4. Create New Software Revision F-27
5. Build and Apply Configuration Revision F-27
6. Activate Software F-27