Filter
Top Products
11
Part I: User’s Guide
1 Chassis Description
2 Boardset Description
3 Configuration Software and Utilities
4 Hot-Swapping Fans, SCSI Hard Drives, and Power Supplies
WARNING
Only a QUALIFIED SERVICE TECHNICIAN is authorized to remove
the server covers and to access any of the components inside the server.
Before removing the covers, see “Safety: Before You Remove Server
Covers” on page 93 and “ Warnings and Cautions” on page 94.
This manual is divided into two parts:
• User’s Guide, beginning on page 11—describes procedures that DO NOT REQUIRE internal
server access. You do not need to be a qualified service technician to perform procedures
listed in the User’s Guide.
• Service Technician’s Guide, beginning on page 91—describes procedures that REQUIRE
internal server access. You must be a qualified service technician to perform procedures listed
in the Service Technician’s Guide.
✏
NOTE
The SRPL8 server system is an upgrade to the SRPM8 server system with
PCI-X features added. The SRPL8 server system implements
PCI 2.1-compliant buses with four PCI-X-enabled slots. In this document,
the term “PCI” is loosely used to refer to PCI and PCI-X features. The term
“PCI-X” is limited to references to PCI-X only.