Filter
Top Products
SRPL8 Server System Product Guide 95
Removing and Installing the Front Bezels
See Figure 20.
1. Use the finger grips to pull the bezels away from the chassis.
2. Remove the bottom bezel to access the hot-swap drives and the peripheral bay.
3. Remove the top bezel to access the following:
• Front side of the fan bay.
• Front panel controller switches (power, reset, and nonmaskable interrupt (NMI) and
indicator lights (power indicator, predictive power supply failure, predictive fan failure,
and hard drive failure).
4. Reinstall the bottom bezel by aligning the clips with the ball studs on the chassis and pushing
the bezel onto the chassis.
5. Reinstall the top bezel by aligning the ball studs with the clips on the chassis and pushing the
bezel onto the chassis.
OM10705
A
B
Figure 20. Removing the Front Bezels
A. Bottom Bezel
B. Top Bezel