Filter
Top Products
SRPL8 Server System Product Guide 41
Advanced Menu
Default values are in bold typeface.
WARNING
Setting items on this menu to incorrect values may cause your system to
malfunction.
Feature Option Description
Processor Serial Number Disabled
Enabled
Enables or disables the Processor Serial Number feature
of the Pentium III Xeon processor.
Reset Configuration Data
No
Yes
If "Yes" is selected, BIOS clears the System
Configuration Data during the next boot. The field is
automatically reset to "No" in next boot.
Use Multiprocessor
Specification
1.1
1.4
Selects the version of the Multiprocessor Specification to
use. Some operating systems require version 1.1 for
compatibility reasons.
Large Disk Access Mode CHS
LBA
Select the drive access method for IDE drives. Most
operating systems use Logical Block Addressing (LBA).
However, some operating systems may use the Cylinder
Head Sector (CHS). See your operating system
documentation for more information.
Pause Before Boot
Disabled
Enabled
If enabled, BIOS pauses five-seconds before booting the
operating system.
Hot-plug PCI Master Control
Disabled
Enabled
Set to "Enable" to create the Hot-plug PCI Resource
Table and to reserve resources for each hot-plug PCI
slot.
Hot-plug PCI Allocation Level Disabled:
Min.
Max.
Set amount of resources to allocate to empty hot-plug
PCI slots.
Timeout on POST errors
Disabled
Enabled
If enabled, boots operating system after 5 seconds of
displaying POST errors. If disabled, waits for user to
press F1 or F2.
PCI Configuration Selects PCI Configuration submenu.
I/O Device Configuration Selects I/O Device Configuration submenu.
Advanced Chipset Control Selects Advanced Chipset Control submenu.