Filter
Top Products
SRPL8 Server System Product Guide 97
Removing the PCI Bus Hot-Plug Cover
See Figure 22.
1. Observe the safety precautions, warnings, and cautions at the beginning of this chapter.
2. Remove and save the screws that attach the PCI bus hot-plug cover to the chassis.
3. While facing the front of the server, push the PCI cover toward the back of the server to
disengage the tabs from the top cover.
4. Remove the cover and set it aside.
OM10750
A
Figure 22. Removing the PCI Bus Hot-Plug Cover
A. Screws (2)
Installing the PCI Bus Hot-Plug Cover
1. Ensure that add-in boards are firmly seated in their respective slots and that the retaining
brackets for the add-in boards are reinstalled.
2. Position the hot-plug cover over the top cover so that the tabs along its edges align with the
slots in the top cover.
3. Lower the hot-plug cover until it rests on the top cover.
4. Push the hot-plug cover toward the front of the server to engage the row of tabs attaching the
hot-plug cover to the top cover.
5. Attach the hot-plug cover to the top cover using the screws you removed earlier.