Filter
Top Products
24 Boardset Description
Processor Overview
Each Pentium III Xeon processor is packaged in a single edge contact (S.E.C.) cartridge. The
cartridge includes:
• The processor core with an integrated 32 KB primary (L1) cache
• The secondary (L2) cache
• A thermal plate
• A back cover
Processors used with the SRPL8 server must be:
• 5/12 volts
• 100 MHz FSB
• 1 or 2 MB cache
• Validated by Intel for SRPL8 systems
Each processor implements the MMX™ technology with streaming SMID extensions and
maintains full backward compatibility with the 8086, 80286, Intel386™, Intel486™, Pentium, and
Pentium Pro processors. The processor’s numeric coprocessor significantly increases the speed of
floating-point operations and complies with ANSI/IEEE standard 754-1985.
Each S.E.C. cartridge connects to one of two processor mezzanine boards through a 330-pin
Slot 2 edge connector (SC330.1). The cartridge is secured to the mezzanine carrier by a retention
bracket. Each mezzanine board connects to the profusion carrier. Depending on configuration,
your system has one to eight processors.
The processor external interface is multiprocessor (MP)-ready and operates at 100 MHz. The
processor contains a local APIC unit for interrupt handling in MP and uniprocessor
(UP) environments.
The L2 cache is located on the same die as the processor core and L1 cache. The cache:
• Is offered in 1 MB and 2 MB configurations
• Is ECC protected
• Operates at the full core clock rate