Filter
Top Products
SRPL8 Server System Product Guide 47
System Management Submenu
Default values are in bold typeface.
Feature Option Description
Firmware SMIs Disabled
Enabled
Enables SMI generation by agents on the Intelligent
Platform Management Bus (IPMB). Because BIOS
requires SMIs for various tasks, setting this field to
disabled does not disable all sources of SMIs.
System Event Logging Disabled
Enabled
Enabled: logs critical system events.
Clear Event Log
Disabled
Enabled
Clears the System Event Log (SEL). This option is reset
to Disabled on each boot.
Memory Scrubbing
Disabled
Enabled
Enables memory scrubbing by the Profusion chip set.
AERR Enable Disabled
Enabled
Enables AERR to be asserted on the processor host
buses.
Assert NMI on BERR Disabled
Enabled
Enables BERR to be reported as a critical event via NMI.
Requires SERR to be enabled as well.
Assert NMI on PERR Disabled
Enabled
Enables PERR to be reported as a critical event via NMI.
Requires SERR to be enabled as well.
Assert NMI on SERR Disabled
Enabled
Enables SERR to be reported as a critical event via NMI.
Enable Host Bus Error Disabled
Enabled
Enables ECC checking on the processor buses.
FPC Error Check
Disabled
Enabled
Enables Front Panel Controller (FPC) checking. If
enabled, BIOS verifies that it can communicate with the
FPC.
HSC Error Check
Disabled
Enabled
Enables Hot-swap Controller (HSC) checking. If
enabled, BIOS verifies that it can communicate with the
HSC.
Server Management Information Selects Server Management Information submenu.