Interphase Tech 5536 Network Card User Manual


 
Hardware Management
80 Interphase Corporation
Setting Up ISDN Port Properties
If the 553x ISDN RAS Support driver is installed on the
machine, you can use the WAN Adapters Setup Utility to set
up the board’s port properties.
NOTE
Before you configure your ISDN PRI line, first obtain the
switch type and other necessary information about your
subscription from your ISDN provider.
To display the ISDN PRI Port Properties dialog box:
1. In the Cards section of the WAN Adapters Setup dialog
box, select the ISDN port you want to configure and
click the Properties button.
The ISDN PRI Port Properties dialog box appears:
Figure 5-3. ISDN PRI Port Properties