Interphase Tech 5536 Network Card User Manual


 
Procedures
180 Interphase Corporation
See if the drivers
are running
1. From the Start menu, select Programs, then
Administrative Tools (Common), and then
Event Viewer. The following messages must
appear:
SynSV6 The Device \Device\SynSV6 has been
successfully created. Its symbolic link name is
\DosDevices\SynSV6.
SynSYS Adapter SynCard0 Opened.
SynSYS SynSys Driver Loaded.
2. From the Start menu, select Settings, and Control
Panel. Then double-click the Devices icon. The
following devices must appear in the Devices list
with a status of Started:
Figure F-1. Devices List
Interphase 5536 Digital Modem RAS driver
Interphase 5536 Serial driver
Interphase 553X ISDN RAS Support driver
Interphase Base driver
Interphase Base driver API
In addition, the software LEDs must be green in the
WAN Adapters Setup dialog box and the RAS
Support General dialog box.
If you want to... Do this...