Filter
Top Products
Declaring Serial Driver Modems in Windows NT
112 Interphase Corporation
9. When a message informs you that the modem has been
set up successfully, click Finish.
The Modems Properties dialog box appears, listing the
installed digital modems and their attached COM ports,
as follows:
Figure 7-1. List of Modems Installed
If needed, use the Properties or Dialing Properties
button to set up modem or dialing properties. For
information, see Microsoft online Help.
10. When you are finished with the modem setup, click
Close.
11. If you installed or removed the Interphase Digital
Modem on any ports, a message informs you that dial-