Interphase Tech 5536 Network Card User Manual


 
Verifying COM Ports
114 Interphase Corporation
NOTE
HyperTerminal is a standard feature of Windows NT. If it is
not present in the Accessories menu, it can be installed.
To install HyperTerminal, open the Control Panel. Select
Add-Remove, and Windows NT Setup. Then select
HyperTerminal in the Communications dialog box.
2. Enter a name you want to use to save the file, and click
OK. (The name must contain at least one character.)
The Connect To dialog box appears:
Figure 7-2. Choosing the COM Port to Verify
If the list of COM ports is blank, the Serial driver is not
installed.
3. Choose the serial COM port to verify (COM
iXX) and
click OK.
The Port Settings dialog box appears.