Interphase Tech 5536 Network Card User Manual


 
Software Overview
6 Interphase Corporation
RAS support driver for digital modem
communications
The SecurID support driver submits, in coordination
with the SecurID support service, the security
information to the ACE/Server through the local
ACE/Agent, and gives the authentication result back to
the RAS support driver, which will either carry on the
connection or abort it.
New PIN and Next Tokencode modes are not
supported.
Utilities
The software also includes the following utilities, which are
installed along with the base driver:
The WAN Adapters Setup utility enables you to manage
the board’s firmware and hardware properties.
The Digital Modem Monitor utility enables you to
monitor the board’s digital modem connections.
The SynWatch utility enables you to track connections
and data traffic on ISDN channels.
The LoopTest utility enables you to check the ISDN
line.
The Line Test utility enables you to set port modes (with
your Telco’s agreement) if you need to do low-level
testing because of line trouble at installation.
The Line Status utility enables you to diagnose network
connection problems.