Filter
Top Products
Inspecting the Board
16 Interphase Corporation
Inspecting the Board
Before installing the communications controller board in your
computer, visually inspect it for any damage that might have
occurred during shipment from the factory.
CAUTION
The board is packed in an antistatic bag to protect it
during shipment. Keep the board in its protective
antistatic bag until you are ready to install it in the host
computer. To prevent damage to the board due to
electrostatic discharge, wear a grounding strap and
handle the board only by its edges. Do not touch its
components or any metal parts other than the faceplate.
1. Open the shipping container and carefully remove its
contents.
2. Inspect each item for damage. If you find any omissions
or damage, contact your supplier and the carrier (for
example, UPS or Federal Express) that delivered the
package.