Interphase Tech 5536 Network Card User Manual


 
Chapter 2: Installing the Hardware
5536 PRI RAS Communications Controller Users Guide 19
Figure 2-2. Removing the Computer Cover
3. Locate a suitable PCI expansion slot, and remove the
screw that attaches the expansion plate to the computer.
Save the screw for Step 6.
This board is a full-length PCI add-on card. Choose a
slot in which the board will not be in contact with other
elements of the motherboard, such as memory modules,
connectors, or the host processor’s heat sink.
CAUTION
If you are installing on an MVIP bus, see Connecting to an
MVIP Bus on page 22 before continuing.
2
2
2