Interphase Tech 5536 Network Card User Manual


 
Procedures
182 Interphase Corporation
Configure a RAS
port to dial out
1. Open the Remote Access Setup dialog box. (See
Open the Remote Access Setup dialog box on page
181.) Then select the port and click Configure.
2. Select either the Dial out only or the Dial out and
Receive calls option, and click OK.
Manage RAS
incoming ports
1. From the Start menu, select Programs, then
Administrative Tools (Common), and then
Remote Access Admin.
2. View online help for instructions.
Determine how
many remote users
are connected
1. From the Start menu, select Programs, then
Administrative Tools (Common), and then
Remote Access Admin.
2. View online help for instructions.
Determine how
many ports are
available
1. From the Start menu, select Programs, then
Administrative Tools (Common), and then
Remote Access Admin.
2. View online help for instructions.
Make a RAS
outgoing call
1. From the Start menu, select Programs, then
Accessories, and then Dial-Up Networking.
2. If the phonebook is empty, create a new RAS
phonebook entry. (For information, see the RAS
online help.)
3. Select a phonebook entry and click the Dial button.
If you want to... Do this...